How to Attach a Flag to a Jeep Wrangler
You’re not alone if you’re looking for advice on how to attach a flag to a Jeep Wrangler. There are actually quite a few ways you can go about it. But the best method depends on how serious you are about flying Old Glory.
We think the ideal approach involves using your Wrangler’s rear hitch receiver. This is going to offer the sturdiest, more practical mounting method for one of our flag poles made in USA.
In fact, we have some really great kits that take all the stress out of getting a flag flying from your Jeep Wrangler. Our 20' HD Telescoping Flagpole + Hitch Mount (also available in a 25’ size) makes a statement. It also lets you choose how high you want to fly the flag. Learn more about how it works and how it compares to other methods below!
Key Takeaways
- A hitch receiver mount is the most stable, versatile way to attach a flag to a Jeep Wrangler.
- Other options include tire mounts, roll bars, sport bar clamps, or antenna/whip-style mounts.
- Telescoping flagpoles are great for attaching to a Jeep because they go up and come down in minutes.
- The U.S. Flag Code recommends flying the flag on the passenger side of a vehicle (if it’s not mounted directly in the middle).
- HD Flagpole’s flag pole kits make it quick and easy, and they even come with a properly sized US flag!
How to Attach a Flag to a Jeep Wrangler: 4 Methods You Can Choose From
What makes your Wrangler so cool is how many different mounting points it comes equipped with straight from the factory, so you technically don’t have to drill anything! The right method depends on how big a flag you intend to fly and whether you need the setup to come off quickly.
Here’s our advice on how to attach a flag to a Jeep Wrangler.
1) Hitch Receiver Mount (Best Way)
Your Jeep’s hitch receiver is undeniably the most secure mounting point. You can slide a hitch mount bracket into the standard receiver and lock it in place with a pin. Then, it’ll be capable of holding a full-size telescoping flagpole without any vehicle modifications.
You’ll be able to see the flag flying high above the roofline from every direction. But the best part is the mount is removable, allowing you to pull it in seconds when you need the receiver for a bike rack or trailer.
2) Tire Mount (Alternative Portable Option)
A tire mount bracket sits between the wheel and the hub/rotor face, secured by the lug nuts.
It works really well on the Wrangler’s existing spare tire. But just know you won’t get the same level of stability, especially while driving. You’ll obviously have to remove it for tire rotations, too. It’s still a solid backup if your hitch isn’t an option.
3) Roll Bar or Sport Bar Clamp (Only For Smaller Flags)
A third option if you’re still searching for answers on how to attach a flag to a Jeep Wrangler is to bolt an aftermarket clamp onto the roll bar or sport bar on your Wrangler.
This will allow you to fly smaller flags in the 12” x 18” up to 2’ x 3’ range. But don’t expect this method to accommodate a full-sized flagpole. It may be fine for quick little parade cruises, though.
4) Antenna or Whip-Style Mount (Cheapest and Flimsiest)
Maybe you just want to fly a tiny little flag. This is the auto parts store option that you can get up on your Wrangler today. Clip a whip-style rod to the window edge or replace the antenna. Then, slide a small flag onto the end.
It’s by far the least expensive option on this list. It’s also the least visible and has the least impact. But sometimes it’s your only option.
Why Go With a Telescoping Flagpole on a Jeep Wrangler?
So you’ve got the mount side of things figured out. Now you have to pick the right flagpole. We recommend telescoping over one-piece poles, and there’s one reason why - flexibility.
A fixed pole is a hassle to deal with. On the other hand, telescoping flagpoles break down in sections, from as tall as 25’ all the way down to just 7’. You can fly a 4’ x 6’ flag, visible from blocks away. Then break it down and head home! It’s that easy.
Portability is the other benefit. You can fly the same flag from your Jeep Wrangler that you slide into your ground sleeve at home. It’s a residential flagpole during the week, and it can hit the road on the weekends.
Our 20' HD Telescoping Flagpole + Hitch Mount or 25' HD Telescoping Flagpole + Hitch Mount is the best way to get Old Glory flying behind you as you head out on the open road. You get the pole, a hitch and tire mount, a 4’ x 6’ American flag, and everything else you need.
Like all types of flagpoles at HD Flagpoles, it’s carefully crafted from anodized aluminum so you can rest assured it’ll stand the test of time, too. It’s also backed by our satisfaction guarantee, a lifetime warranty, and exceptional customer service from A to Z.
Fly Old Glory Anywhere the Road Takes You!
There you have it, how to attach a flag to a Jeep Wrangler. Hopefully this guide has left you feeling clear and confident in your next steps. Order your kit today and see for yourself how simple it is.
Frequently asked questions
Can I put a flag on my Jeep Wrangler?
Yes, and we make it easy here at HD Flagpoles with our complete kits. You can effortlessly set up the hitch or tire mount and then slide the telescoping flagpole on.
Is it legal to hang a flag on your car?
Yes, in fact, it’s a really popular way to show patriotism during parades or while your car is parked at the beach or a campground.
How to mount a flag on a truck without drilling?
A hitch mount slides into any standard receiver and locks with a pin. Or, use the wheel-mount method. Both hold a full-size telescoping pole, and you don’t have to make a single mod to your vehicle!
What side should the American flag be on a car?
The U.S. Flag Code says the flag should be fixed to the right fender or chassis. However, our kits attach to either the spare tire or hitch and fly behind the vehicle, which means you can disregard this advice.
Leave a comment
All comments are moderated before being published.